Construction:
  • Ribbed thin-wall cast iron crankcase for added strength and durability
  • Internal crankcase breather for reduced emissions
  • Extra large bearing surfaces for low bearing loads and long life
Request Information
Unit of Measure
Items
Model "L" Series Mitsubishi Diesel Engines

Model "L" Series 7.0 to 15.1 Horsepower (hp) Inline 2 Cylinder Mitsubishi Diesel Engine
List Price QUOTE
Model "L" Series Mitsubishi Diesel Engines

Model "L" Series 9.4 to 23.7 Horsepower (hp) Inline 3 Cylinder Mitsubishi Diesel Engine
List Price QUOTE
Brands N/A Mitsubishi
Engine Cycle N/A 4-Stroke
Cooling System N/A Water-Cooled
Engine Type N/A Natural-Aspirated Diesel
Bore N/A 76 mm
Stroke N/A 70 mm
Cylinders N/A 2 N/A 3
Cylinder Arrangement N/A Inline
Total Displacement N/A 0.635 L N/A 0.952 L
Combustion System N/A Swirl Chamber - Indirect Injection (IDI)
Dry Weight N/A 71 kg156.5 lb N/A 75 kg165.3 lb
Electric Starting System Voltage N/A 12 V
Fuel Oil N/A Diesel Fuel Oil (ASTM No. 2-D)
Emission Standards N/A Tier4Fi
Output Power Rating at 1500 rpm N/A 7.0 hp5.2 kW N/A 9.4 hp7.0 kW
Output Power Rating at 1800 rpm N/A 9.0 hp6.7 kW N/A 12.2 hp9.1 kW
Output Power Rating at 2000 rpm N/A 10.1 hp7.5 kW N/A 13.7 hp10.2 kW
Output Power Rating at 2200 rpm N/A 11.0 hp8.2 kW N/A 15.0 hp11.2 kW
Output Power Rating at 2500 rpm N/A 12.4 hp9.2 kW N/A 17.0 hp12.7 kW
Output Power Rating at 3000 rpm N/A 13.9 hp10.4 kW N/A 20.4 hp15.2 kW
Output Power Rating at 3600 rpm N/A 15.1 hp11.3 kW N/A 23.7 hp17.7 kW
Prime Power Rating Output at 60 Hz and at 1800 rpm N/A 5.1 hp6.8 kW N/A 10.9 hp8.0 kW
Stand-by Rating Output at 60 Hz and at 1800 rpm N/A 6.0 hp8.0 kW N/A 12.5 hp9.2 kW
Oil Capacity N/A 0.63 gal2.4 L N/A 0.95 gal3.6 L
Lubrication N/A
  • Designed to run at 30 degrees of inclination and includes a full flow spin-on cartridge filter
  • Forced circulation by gear pump
Fuel and Combustion Systems N/A
  • Bosch style fuel injection pump
  • Indirect injection combustion system for low noise and emissions
  • Cylinder head is a prechamber design to increase efficiency of combustion
Mounting N/A
  • Standard crankcase side mounting pads for flexible mounting arrangements
  • Rear engine support available from side mounting pads on SAE 5 housing
Cooling N/A
  • Forced coolant circulation by centrifugal pump
  • Cooling packages available for ambient temperatures up to 108 ºF (42 ºC)
  • Cooling Fan (Std. Eqt.) : Variable Speed (VS) - Suction
  • Cooling Fan (Std. Eqt.) : Generator Drive (GD) - Pusher
Starter Voltage N/A 12 V
Starter Power N/A 1.2 kW N/A 1.7 kW
Alternator Voltage N/A 12 V
Alternator Power with Integral Regulator N/A 40 A
Glow Plug Voltage N/A 12 V
Switch N/A High Water Temperature Low Oil Pressure
Stop Solenoid N/A 12 V integrated ETR stop solenoid eliminates external linkage
Governing N/A Mechanical centrifugal governing is provided for either variable or constant speeds
Drives N/A
  • SAE 5 flywheel housing and 6.5 in SAE flywheel (GD and VS-1 models)
  • Flat face flywheel (VS-2 models)
  • Rotation direction: counter-clockwise, facing the flywheel end
  • Side PTO drives are available for mounting at the gear end